Error codes
Washer error codes
Front-load and top-load washer codes from the brands we see most. A code tells you which system tripped, not always which part failed.
- Proudly CanadianOttawa-based team
- BBB accreditedRepairWell, our operator
- 15+ yearsin appliance repair
- Insured technicianslicensed for gas work
- Satisfaction guaranteed90-day warranty on replaced parts
- Free diagnosticwhen you go ahead with the repair
Before trying anything: unplug the appliance (or switch off its breaker) and close the water or gas supply where it applies. Many codes clear after a one-minute power reset; if the same code comes back, the fault is real.
LG washer codes
| Code | Usually means | What you can try |
|---|---|---|
| OE | Drain: water didn't leave the drum in time. | Clean the drain pump filter behind the small front panel (towels ready) and check the drain hose for kinks. |
| IE | Fill: water didn't reach the level in time. | Open both taps fully and check the inlet hose screens. |
| UE | Unbalanced load. | Redistribute the load; wash bulky items with a couple of towels. |
| LE | Motor locked or overloaded. | Remove some of the load and restart. If it returns with a light load, book a visit. |
| dE / dE1 / dE2 | Door switch or lock problem. | Close the door firmly and check nothing is caught in the seal. |
| FE | Overfill: too much water. | Turn off the taps and unplug it. This is usually the inlet valve or level sensor. |
| PE | Water level sensor fault. | Unplug for a minute and retry. If it returns, book a visit. |
| tE | Heater or temperature sensor fault. | The washer may still run on cold. Book a visit. |
| SUD / Sd | Too many suds. | Use HE detergent and less of it; run a rinse. |
| CL | Child lock is on. Not a fault. | Hold the button marked with the lock symbol (often two buttons together) for a few seconds. |
Samsung washer codes
| Code | Usually means | What you can try |
|---|---|---|
| 4C / 4E / nF | Water supply: not filling. | Open the taps, check the hoses for kinks and clean the inlet screens. |
| 5C / 5E / nd | Drain problem. | Clean the debris filter at the lower front and check the drain hose. |
| UB / UE / Ub | Unbalanced load. | Redistribute the load and restart. |
| dC / dE / dS | Door not closed or lock fault. | Close the door firmly; check nothing is caught. |
| LC / LE | Water level or leak detected. | Check the drain hose height and look for water under the washer. |
| 3C / 3E | Motor or motor-drive fault. | Unplug for a few minutes and retry. If it returns, book a visit. |
| HC / HE | Heater or water temperature fault. | Book a visit; it may still wash on cold. |
| 1C / 1E | Water level sensor fault. | Book a visit. |
| OC / OE / 0F | Overflow: too much water. | Turn off the taps and unplug it. |
| Sud / SD / 5d | Excess suds. | Use less HE detergent and run a rinse. |
Whirlpool, Maytag, Kenmore & Amana washer codes
| Code | Usually means | What you can try |
|---|---|---|
| F8E1 / LO FL / LF | Long fill: water didn't fill in time. | Open the taps fully and check the inlet screens. |
| F9E1 / F21 / Ld | Long drain. | Clean the pump filter (front-loaders) or check the drain hose. |
| F5E1 | Door switch fault. | Close the door firmly and retry. |
| F5E2 | Door lock fault: won't lock or unlock. | Unplug for a minute; if it persists, book a visit. |
| F7E1 | Drive motor speed fault. | Reduce the load and retry. If it returns, book a visit. |
| Sd / SUdS | Too many suds. | Use less HE detergent. |
| uL | Unbalanced load. | Redistribute and restart. |
Bosch washer codes
| Code | Usually means | What you can try |
|---|---|---|
| E17 / F17 | Water supply: filling too slowly. | Open the tap and check the hose. |
| E18 / F18 | Drain problem. | Clean the pump filter at the lower front. |
| E16 / F16 | Door not closed. | Close the door firmly and check the seal. |
| E23 / F23 | Water detected in the base (leak protection). | Turn off the tap and book a visit. |
Electrolux & Frigidaire washer codes
| Code | Usually means | What you can try |
|---|---|---|
| E11 | Fill problem. | Open the taps and check the inlet screens. |
| E21 | Drain problem. | Clean the drain filter and check the hose. |
| E41 | Door lock fault. | Close the door firmly and retry; book a visit if it returns. |
Code still showing?
Book a visit and tell us the code and the model number. The diagnostic is free when you go ahead with the repair.
Codes vary by model and year; your owner's manual is the final word. Brand names identify equipment; Northway is not affiliated with any manufacturer.